Professional Oilfield Equipment Supplier

Category: Resources

  • My Experience in the Drilling Cement Laboratory

    —

    by

    in

    A Key Step Toward Excellence in Petroleum Engineering One of the most valuable experiences I’ve had was working in the Drilling Cement Laboratory, where I gained hands-on knowledge about well cementing operations, one of the most critical stages in drilling oil wells. During this experience, I worked with several specialized instruments used to test the…

  • Common Well Cementing Problems & Solutions

    —

    by

    in

    Top Problems: Problem: Mud channels → Weak isolationSolution: Centralizers, spacers, pipe movement, turbulent flow Problem: Gas leaks → Sustained casing pressureSolution: Rapid-set cement, foam cement, fluid loss control Problem: Cement loss → Incomplete fillSolution: Lightweight slurries, LCM, staged cementing Problem: Weak cement → Failed isolationSolution: Spacer hierarchy, compatibility testing Problem: Fast setting / Strength lossSolution:…

  • Well Cementing

    —

    by

    in

  • Cement Job

    —

    by

    in

  • Cementing Integrity Evaluation

    —

    by

    in

  • Squeeze Cementing Procedure

    —

    by

    in

    Squeeze cementing procedure is a technique used to address wellbore integrity issues by injecting cement slurry into specific zones.This can done by these procedures:-Identify the target zone: The area requiring repair, such as a leak or unwanted fluid flow path, is identified. Design the cement slurry: The cement slurry is formulated with specific properties like…

  • Casing and Cementing Centralization

    —

    by

    in

    Find out how to use the right centralizers to avoid risks and delays when getting to total depth.

  • Primary Cementing (Liner)

    —

    by

    in

    Primary cementing(liner) is a well completion operation that involves placing a cement sheath around a liner string in a wellbore. The primary cementing process for liners typically involves the following steps:

  • Well Completion Perforation

    —

    by

    in

    Perforation is a crucial step in well completion, creating the connection between the wellbore and the reservoir. It involves creating holes through the casing and cement sheath into the target formation, enabling the flow of hydrocarbons (oil and gas) into the wellbore. There are various methods of perforation, each with its advantages and limitations: Factors…

  • BOP Testing on Test Stump & Wellhead

    —

    by

    in

    Test Pressures and Acceptance Criteria BOP (Blowout Preventer) testing is a mandatory well control requirement to verify the integrity, sealing capability, and functionality of the BOP stack before any drilling operations. 1-BOP Testing on Test Stump (Surface Test) The BOP stack is installed on a test stump at surface and pressure-tested before running it on…