Category: Resources
-
Cementing Calculation
Cementing: The Unsung Hero of Oil & Gas Production Cementing might not be the most glamorous aspect of oil and gas drilling, but it’s undeniably crucial. What is it? Cementing involves injecting specialized cement slurries into the wellbore to:Isolate zones: Prevent unwanted fluid flow between different formations.Support the casing: Provide structural integrity and protection.Control pressure:…
-
Squeeze Cementing Introduction
Squeeze cementing is a critical process in the oil and gas industry. It involves injecting a cement slurry through perforations in the casing to create a seal in specific locations, effectively bridging undesired gaps. A common misconception is that the cement penetrates the pores of the rock. However, the cement slurry actually dehydrates against the…
-
From Drilling to Completion-Same Well, Different Dimensions
They highlight the clear difference between drilling-phase equipment and post-drilling wellhead configuration: During drilling (BOP Stack)Large bore sizesHigh pressure ratings (5K / 10K psi)Multiple rams (Pipe Ram, Blind/Shear Ram)Designed mainly for well control and safety After drilling (Wellhead / Completion phase)Smaller internal diametersCasing-oriented componentsFocus on well integrity, flow control, and future production Same well, same…
-
Basic Well Completion Note
Setting the permanent packer using wire-line:1- Assemble packer and setting tool to wireline2- Run with controlled speed to required depth3- Correlate depth using GR/ casing collar locator (CCL)4-Activate setting tool to set slips and packer as follows:4.1 Send electric current down the cable4.2 Ignite the primer cord which generate high pressure gas4.3 This gas pressure…
-
My Experience in the Drilling Cement Laboratory
A Key Step Toward Excellence in Petroleum Engineering One of the most valuable experiences I’ve had was working in the Drilling Cement Laboratory, where I gained hands-on knowledge about well cementing operations, one of the most critical stages in drilling oil wells. During this experience, I worked with several specialized instruments used to test the…
-
Common Well Cementing Problems & Solutions
Top Problems: Problem: Mud channels → Weak isolationSolution: Centralizers, spacers, pipe movement, turbulent flow Problem: Gas leaks → Sustained casing pressureSolution: Rapid-set cement, foam cement, fluid loss control Problem: Cement loss → Incomplete fillSolution: Lightweight slurries, LCM, staged cementing Problem: Weak cement → Failed isolationSolution: Spacer hierarchy, compatibility testing Problem: Fast setting / Strength lossSolution:…